another rs1800

[frsjon]

fitted the brake /clutch fluid reservoir today,set it in a sheet of carbon and fitted it where the heater once lived





loads more parts have turned up just need some time to fit them

[shortie54]

Thats awesome Jon m8 really neat & tidy hope to see it on track this summer

[frsjon]

finally after 7 weeks AP racing have made my rebuild kits for my master cylinders...




so cylinders and pedals all built up





also something ive been waiting forever for the 2 45 degree fuel resistant hoses for the fuel filler..



more carbon,cut some up to cover the original holes where the wing mirrors would mount,went a bit different and shaped then to the recessed area



upgraded the fuel regulator,fitted a turbosmart 800 unit,canged the push fit fittings for -6 and fitted it straight to the bulkhead







just need some more -6 hose as what originally fitted isnt long enough

[Minirotty]

awsome pal!!!!

[frsjon]

cheers kev,still loads to do for show season

[frsjon]

big thanks to raj from autoflock for my carbon door cards



final fit and hosed up fuel regulator



also p-clipped the wiring for the starter and alternator under the front crossmember

[martin xr2L]

looking as smart as usual mate!

[frsjon]

todays efforts...

hydro clutch conversion



and my boost pipe has been exstended so it goes straight to intercooler and so i can have some brackets welded on so it doesnt come off under high boost

[frsjon]

boost pipe with bracket welded on /painted and fitted







due to trying to get my floor mounted pedal box as far forward as possible this had to happen



a false floor is being made to this profile and will look like this fitted

[frsjon]

im aiming to sit as straight legged as possible so the drivers seat will be going further back to help.

also new pins and clips for my AP calipers have arrived



more progress once the floors made

[frsjon]

battery connected,laptop connected,base map loaded... wont be long now



so live data without it running,at least i know things are working

[frsjon]

its alive and idles sweetly

[frsjon]

more pics at the weekend throttle cable made to fit the pedal box,tidying the wires in the car and hopefully a quick test drive..weather pomitting

[martin xr2L]

Test drive!!!! Omg!!!!

[frsjon]

not yet mate but soon couple of pics but take into account it needs a clean lol

[martin xr2L]

looking swish mate!

[frsjon]

a couple of pics ive found of a very wet combe a few weeks ago

[frsjon]

little pic of the car on page 128 of the new fast ford mag feature hopefully in next month

[frsjon]

as the cars been running for a while now ive dropped the oil and the sump for health check and all is good
also while the sump was off it would be rude not to put this one on

[frsjon]

[martin xr2L]

Looks awesome mate! You have done a great job on it!!

[frsjon]

cheers mate,cant wait to use it

[frsjon]

not a lot of progress lately as im still fitting/modding things to fit the raceline sump
but i do have a few left over pics from its photoshoot at combe

[frsjon]

the cars booked in for mapping on the 4th of march at JKM performance ..in the meantime i need to pull my finger out and get the car finished .so to start with im replacing the dash clocks with some custom gauges as most of the original didnt work with all the changes to the car..

[frsjon]

all in and working (cars cold)